Wing Cosplay Framework
par randell123
Fichiers imprimables (18)
-
stlbottom_seg2.stl
24 Ko · 4 953 téléchargements
-
stljoint_lock.stl
113 Ko · 4 938 téléchargements
-
stllong_lock.stl
113 Ko · 4 940 téléchargements
-
stlextra_long_lock.stl
113 Ko · 4 945 téléchargements
-
stlbottom_seg1.stl
288 Ko · 4 916 téléchargements
-
stlshort_lock.stl
113 Ko · 4 928 téléchargements
-
stlarm_joint.stl
688 Ko · 4 936 téléchargements
-
stltop_seg2.stl
11 Ko · 4 926 téléchargements
-
stltop_seg1.stl
15 Ko · 4 917 téléchargements
-
stltop_seg3.stl
15 Ko · 4 894 téléchargements
-
stlbottom_seg3.stl
275 Ko · 4 923 téléchargements
-
stlspine_joint.stl
585 Ko · 4 921 téléchargements
-
stlmoving_sec.stl
1.2 Mo · 4 912 téléchargements
-
stlshort_body.stl
585 Ko · 4 911 téléchargements
-
stllong_body.stl
585 Ko · 4 911 téléchargements
-
stlbottom_sec.stl
1 Mo · 4 918 téléchargements
-
stltop_sec.stl
1.7 Mo · 4 918 téléchargements
-
stlextra_long_body.stl
24.7 Mo · 4 880 téléchargements
Description
Made by Randell Daniel Co
This is an instruction on how to make your own bamboo framed wing.
This was originally part of a costume called Incursio Evolve from Akami Ga Kill.
MY friend requested me to make him this costume. Going as far as prototyping 3 versions of this wing.
"MATERIALS"
- bamboo (diameter 1.5cm).
- glue gun.
- mighty ban.
- 3D printer.
- metal skewer stick.
- zip tie(these wings gets heavy so some 3d prints may break).
- Metal or wooden stick (min 45cm).
"WARNING"
- This may be not exact measurements because tiny variation on the angle of one of the joints would drastically change the wing shape.
- depending on the size and material of the wing your 3d print might break.
- the ends of the wings should be connected with a metal so that if it hits something
the metal would bend instead of the joints taking the punishment.
"VIDEO"
https://youtu.be/y9G45rBRPyU