Mini ITX Computer Case - Modular / Stackable
par Kurakuea
Fichiers imprimables (24)
-
stlITX_Stacker_Slim_-_Front_Panel_with_Power_and_LED_v2.0.stl
23 Ko · 3 825 téléchargements
-
stlITX_Stacker_Standard_-_Back_Blank_Panel_v2.0.stl
5 Ko · 3 816 téléchargements
-
stlITX_Stacker_Standard_-_Back_Panel_with_Wifi_v2.0.stl
14 Ko · 3 817 téléchargements
-
stlITX_Stacker_Slim_-_Front_Blank_Panel_v2.0.stl
4 Ko · 3 809 téléchargements
-
stlITX_Stacker_Slim_-_Vent_Panel_v2.0.stl
160 Ko · 3 806 téléchargements
-
stlITX_Stacker_-_MB_Tab_Lock_v1.0.stl
22 Ko · 3 801 téléchargements
-
stlITX_Stacker_Standard_-_Hard_Drive_Bracket_v1.0.stl
300 Ko · 3 835 téléchargements
-
stlITX_Stacker_Standard_-_Vent_Panel_v2.0.stl
189 Ko · 3 793 téléchargements
-
stlITX_Stacker_Standard_-_Dual_Fan_Panel_v2.0.stl
215 Ko · 3 792 téléchargements
-
stlITX_Stacker_Slim_-_Back_Blank_Panel_v2.0.stl
5 Ko · 3 783 téléchargements
-
stlITX_Stacker_Slim_-_Back_Panel_with_Wifi_v2.0.stl
14 Ko · 3 783 téléchargements
-
stlITX_Stacker_Standard_-_Front_Blank_Panel_v2.0.stl
4 Ko · 3 793 téléchargements
-
stlITX_Stacker_Standard_-_Front_Panel_with_Power_v2.0.stl
17 Ko · 3 790 téléchargements
-
stlITX_Stacker_Slim_-_Single_Fan_Panel_v2.0.stl
138 Ko · 3 783 téléchargements
-
stlITX_Stacker_Slim_-_Universal_Corner_v2.0.stl
26 Ko · 3 786 téléchargements
-
stlITX_Stacker_Slim_-_Back_Plate_Corner_v2.0.stl
29 Ko · 3 783 téléchargements
-
stlITX_Stacker_Standard_-_Universal_Corner_v2.0.stl
25 Ko · 3 777 téléchargements
-
stlITX_Stacker_Standard_-_Back_Plate_Corner_v2.0.stl
27 Ko · 3 748 téléchargements
-
stlITX_Stacker_-_Flange_v2.0.stl
46 Ko · 3 773 téléchargements
-
stlITX_Stacker_-_Top_or_Bottom_v2.0.stl
106 Ko · 3 807 téléchargements
-
stlITX_Stacker_-_3.5in_Hard_Drive_Front_or_Back.stl
3 Ko · 3 746 téléchargements
-
stlITX_Stacker_-_3.5in_Hard_Drive_Corner.stl
24 Ko · 3 761 téléchargements
-
stlITX_Stacker_-_3.5in_Hard_Drive_Right.stl
62 Ko · 3 756 téléchargements
-
stlITX_Stacker_-_3.5in_Hard_Drive_Left.stl
63 Ko · 3 745 téléchargements
Description
This is a project I have been working on for some time. It is the original purpose for which I bought a 3D printer and is finally coming to fruition. This design will require onboard power or pico-PSU style power supplies, for now.
Project Goals:
Modularity - Inspired by Legos
Stackable - Each self-contained module can be stacked in a tower
Minimalistic - Small footprint, as little wasted inner space as possible
Print-ability - No supports, little waste, low warp risk
Marketability - Anyone interested?
There are two version to choose from:
The slim version is for Slim-ITX boards and does not allow space for hard drives.
The standard version should fit any ITX board and has space for two hard drives with the included bracket.
Future Plans:
I'd like to add modules to hold various PSU and VGA cards. This will enable this case to be used for a gaming or desktop style system. If anyone would like customization, please message me.
Additions:
3.5 inch Hard Drive Module (currently untested, 1/27/17)