Slide Switch using 20mm Microswitch
par peaberry
Fichiers imprimables (3)
-
stllms_01_base.stl
54 Ko · 1 602 téléchargements
-
stllms_01_lever.stl
2 Ko · 1 589 téléchargements
-
stllms_01_top.stl
30 Ko · 1 577 téléchargements
Description
This converts a small microswitch into a slide switch. It's designed to suit a 20mm wide microswitch (20mm x 10mm x 7mm / 0.78" x 0.4" x 0.3") with 2.5mm diameter mounting holes.
The overall size of the printed switch body is 40mm x 30mm x 15mm, and it has two 4mm mounting holes, which would be suitable to mount directly to 2020 extrusion. The top can be secured with M3 screws and nuts, and there's also a 4mm hole in one side for cable access.