Let's Split Case
par mtdjr
Fichiers imprimables (8)
-
stlSwitch_Plate_Inner_Shell_WIP.stl
299 Ko · 527 téléchargements
-
stlBottom_Cover_Solid.stl
321 Ko · 512 téléchargements
-
stlCase_Outer_Shell_Left.stl
616 Ko · 513 téléchargements
-
stlCase_Outer_Shell_Right.stl
598 Ko · 523 téléchargements
-
stlCase_Inner_Shell_Left.stl
365 Ko · 516 téléchargements
-
stlBottom_Cover_for_Acrylic.stl
338 Ko · 516 téléchargements
-
stlCase_Inner_Shell_Right.stl
365 Ko · 514 téléchargements
-
stlCase_Outer_Shell_Right_usb_delete.stl
590 Ko · 513 téléchargements
Description
This is a case for the Let's Split keyboard. I originally had an acrylic sandwich case(116mm x 86mm) and wanted to reuse it for this case. So if you have an acrylic case and want something enclosed, you wont need to desolder switches to use this. The bottom acrylic plate is also usable if you'd like a see through bottom. I've included a solid bottom door and a switch plate so if you don't have the acrylic case, you can still use this. I made the USB openings tall to allow for various configurations. There is a 6° slope to the case.
Everything securely snaps together and requires no screws or standoffs. There are recesses for 8mm bumpons on the bottom plate; you'll want to get some. I have oriented all parts exactly as they should be printed. No supports needed if your printer can handle some short bridging.