Working Time Machine
par stevemedwin
Fichiers imprimables (15)
-
stlface_.stl
1.4 Mo · 4 316 téléchargements
-
stlface_numbers.stl
476 Ko · 4 278 téléchargements
-
stlbushing.stl
149 Ko · 4 258 téléchargements
-
stlstand_.stl
250 Ko · 4 253 téléchargements
-
stlstand_letters.stl
411 Ko · 4 243 téléchargements
-
stlgear_12T.stl
195 Ko · 4 263 téléchargements
-
stlgear_36T_2.stl
405 Ko · 4 270 téléchargements
-
stlgear_36T_3.stl
460 Ko · 4 286 téléchargements
-
stlgear_36T_4.stl
345 Ko · 4 277 téléchargements
-
stlgear_36T_5.stl
374 Ko · 4 273 téléchargements
-
stlgear_48T.stl
588 Ko · 4 265 téléchargements
-
stlmulticolor_gear_rim.stl
331 Ko · 4 244 téléchargements
-
stlmulticolor_gear_spokes.stl
65 Ko · 4 251 téléchargements
-
stlsmall_head_bolt.stl
72 Ko · 4 257 téléchargements
-
stlsmall_head_tool.stl
176 Ko · 4 235 téléchargements
Description
This functional thing builds on the gears in my 100HEX Working Gear Kit https://www.thingiverse.com/thing:2789514 to create a working geared clock faceplate. I found a suitable clock mechanism on Amazon [Mudder High Torque Hands Clock Mechanism with 20 mm shaft length http://a.co/2InBecS]. The gears must be turned by hand as the force is too high to have the clock mechanism actually drive them.
I printed this on a multi-material printer, but the face plate and stand can be printed without the inlays and then either left as is or painted later.
For aesthetic reasons, I made the bolt head smaller than in the Working Gear Kit. I've included a new tool to tighten these bolts.
The bushing goes inside the large 48 tooth gear in the center so it can freely spin when you tighten down the clock mechanism nut.
Here's a short video: https://youtu.be/4pt103Zv_Ow