Iris Box
par tofuji
Fichiers imprimables (7)
-
stlNS_Iris_Box_fuji6_1blade.stl
174 Ko · 3 880 téléchargements
-
stlNS_Iris_Box_fuji6.stl
3.1 Mo · 38 657 téléchargements
-
stlNS_Iris_Box_fuji6_01.stl
3.1 Mo · 37 789 téléchargements
-
stlNS_Iris_Box_fuji6_02.stl
3.1 Mo · 37 965 téléchargements
-
stlNS_Iris_Box_fuji5_8.stl
500 Ko · 39 858 téléchargements
-
stlNS_Iris_Box_fuji5.stl
3.2 Mo · 40 255 téléchargements
-
stl
NS_Iris_Box_fuji6_1blade.stl
174 Ko · 3 722 téléchargements
Description
Updated June 8, 2018(NS_Iris_Box_fuji6.stl)
I updated the design, since all people reported "outer ring is loose, lift up and fins are off".
I added stoppers at bottom of the outer ring(red parts in above picture), which should stop lifting of the ring. This parts are not included in original design.
- I made variations "NS_Iris_Box_fuji6_01.stl" which has 0.1mm thicker fins and "NS_Iris_Box_fuji6_02.stl" which has 0.2mm thicker fins. So if you have good printers and print it in 100% or larger size, please try them.
Added April 22, 2018(NS_Iris_Box_fuji5_8.stl)
This is a test model to know what is wrong and best settings.
New April 22, 2018(NS_Iris_Box_fuji5.stl)
This is a remix of "Preassembled Iris Box" by emmett. This may be good challenge that how you understand 3D printing.
Since original model was not so fine and I wanted to know how the parts are linked, I reconstructed it in CINEMA 4D.
http://www.11moon.com/m200/Iris_Box/Iris_Box_1.mp4
http://www.11moon.com/m200/Iris_Box/Iris_Box_2.mp4