thread creation exercise

par UltiArjan

Fichiers imprimables (4)

  • stl

    SodaBottleCapThing.stl

    194 Ko · 9 171 téléchargements

    Télécharger
  • stl

    SodaBottleCapThingSmall.stl

    194 Ko · 9 109 téléchargements

    Télécharger
  • stl

    DraadEnMoerVersie3.stl

    2.1 Mo · 10 054 téléchargements

    Télécharger
  • stl

    DraadEnMoerVersie3_2_.stl

    3.2 Mo · 10 203 téléchargements

    Télécharger

Description

a small container and 2 "soda bottle cap containers" made to test thread creation in Design spark mechanical

creating threads using revolve in "Design Spark Mechanical"

  • base cilinder diameter for the bolt = 12,5 mm
  • inside cilinder diameter used for the nut = 13 mm
  • placed the faces used for the thread cutting 0,5mm "inside" the base cilender (did not use the complete face), you'll find the used faces in the DesignSpark file (the smallest is used for the bolt, the biggest for the nut, to get some additional marging.
  • I think normal metric thread has a 30 degree angle, but I used 45 degrees for better printability.

This is where I learned how to do it ....

http://www.rs-online.com/designspark/electronics/eng/knowledge-item/designspark-mechanical-thread-creation

Tags

#capsule #design #Designspark #designspark mechanical #design s #design sp #rsdoc #thread #threaded #Treaded