Part Fitting Calibration
par MEH4d
Fichiers imprimables (7)
-
stlS-Plugs.stl
984 Ko · 95 592 téléchargements
-
stl0.2mm_Thin__Wall_calibration.stl
2 Ko · 84 358 téléchargements
-
stl0.3mm_Thin__Wall_calibration.stl
2 Ko · 82 953 téléchargements
-
stl0.4mm_Thin__Wall_calibration.stl
2 Ko · 108 380 téléchargements
-
stl0.5mm_Thin__Wall_calibration.stl
2 Ko · 83 120 téléchargements
-
stl0.35mm_Thin__Wall_calibration.stl
2 Ko · 79 756 téléchargements
-
stl0.45mm_Thin__Wall_calibration.stl
2 Ko · 79 810 téléchargements
Description
Do your print-in-place bearings, joints, hinges..etc, stick together on you ?
Do you have nuts/bolts, screw threads, pegs and holes or gears that were supposed to fit and they don'?t?
Well, those days are over after you run through this calibration for part fitting!