Stream Deck/ Macro Keyboard
par CDante
Fichiers imprimables (8)
-
stlplate_switches.STL
155 Ko · 7 629 téléchargements
-
stl
Keycap.STL
274 Ko · 9 971 téléchargements
-
stl
Main_body.STL
1.1 Mo · 7 571 téléchargements
-
stl
non-slip_pad.STL
272 Ko · 6 883 téléchargements
-
step
Keycap.STEP
137 Ko · 4 874 téléchargements
-
step
main_body.STEP
309 Ko · 4 567 téléchargements
-
step
plate_switches.STEP
229 Ko · 4 556 téléchargements
-
step
non_slip_pad.STEP
61 Ko · 4 469 téléchargements
Description
This is a remix of an existing stream deck! This design was inspired by DaveM (https://www.thingiverse.com/DaveM/about).
Check out his Version of the stream deck!
Thingiverse: https://www.thingiverse.com/thing:2822140
His website: https://www.partsnotincluded.com/diy-stream-deck-mini-macro-keyboard/
I got the idea to make an own version of a macro keyboard and stumbled across the stream deck of DaveM with 8 buttons. Due to the fact that I wanted more switches and no screws, I created my own version.
This includes: the main body (angle in the pictures), a plate for the switches, keycaps and an anti-slip pad.
The complete wiring and programming is based on DaveM's creation and only adapted for 12 instead of 8 switches (F13 - F24).
Additionally to the 3D-printed parts you will need:
- 12x Cherry MX switches (I chose red ones - https://www.reichelt.de/cherry-mx-red-tastenmodul-schnappbefestigung-cherry-mx1a-l1nn-p202567.html?&trstct=pos_10&nbc=1)
- Cables for wiring
- Solder
- Arduino Pro Micro (I used the 3.3v version)
- A camera to upload your Make :)