Wall Socket Cover
par rad2
Fichiers imprimables (10)
-
stlBase_w88mm_h88mm_d35mm.stl
381 Ko · 291 téléchargements
-
stlCover_w88mm_h88mm.stl
339 Ko · 294 téléchargements
-
stlBase_w146mm_h88mm_d35mm.stl
351 Ko · 293 téléchargements
-
stlCover_w146mm_h88mm.stl
448 Ko · 292 téléchargements
-
stlBase_w190mm_h88mm_d35mm.stl
347 Ko · 284 téléchargements
-
stlCover_w190mm_h88mm.stl
554 Ko · 282 téléchargements
-
stlSplit_Base_Right_w172.50mm_h110mm_d35mm.stl
120 Ko · 289 téléchargements
-
stlSplit_Base_Left_w172.50mm_h110mm_d35mm.stl
120 Ko · 286 téléchargements
-
stlSplit_Cover_Right_w172.50mm_h110mm.stl
370 Ko · 285 téléchargements
-
stlSplit_Cover_Left_w172.50mm_h110mm.stl
370 Ko · 280 téléchargements
Description
Updates
9th June 2020: Added 03 more designs with different dimensions and improved strength/printing time.
19th May 2020: I will be posting the enhanced version this week which has much better legs strength for cover and reduced printing time.
Inspiration
Our living room TV wall was complete except 2 ugly sockets right next to the TV. I always wanted to cover them with something which can blend in and adds a dimension to the wall. I couldn't find anything available in market. So my wife came up with this idea of designing and printing a box with beautiful pattern on the cover - it turned out great!
Dimensions
There are 04 different sizes available. Please note that these are inner dimensions of each box. You need to measure the socket width and height as shown in pictures and then choose appropriate box. Make sure you leave atleast 2mm margin. For example if your socket measures 85mm x 80mm you should use the base with 88mm x 88mm.
A. For Single Socket
Width = 88mm, Height = 88mm, Depth = 35mm
STLs
Base_w88mm_h88mm_d35mm.stl
Cover_w88mm_h88mm.stl
B. For Double Socket
Width = 146mm, Height = 88mm, Depth = 35mm
STLs
Base_w146mm_h88mm_d35mm.stl
Cover_w146mm_h88mm.stl
C. For Extra Wide Double Socket
Width = 190mm, Height = 88mm, Depth = 35mm
STLs
Base_w190mm_h88mm_d35mm.stl
Cover_w190mm_h88mm.stl
D. For Split Sockets (Older Version)
Two bases and covers (Mirror of each other)
Single Box Measurements
Width: 172.50mm, Height: 110mm. Depth = 35mm
STLs
Split_Base_Left_w172.50mm_h110mm_d35mm.stl
Split_Base_Right_w172.50mm_h110mm_d35mm.stl
Split_Cover_Left_w172.50mm_h110mm.stl
Split_Cover_Right_w172.50mm_h110mm.stl