Celtic Knot Pattern

par sergeychernyshev

Fichiers imprimables (4)

  • stl

    CelticTriangle_1in.stl

    446 Ko · 429 téléchargements

    Télécharger
  • stl

    CelticTriangle_1_5in.stl

    523 Ko · 415 téléchargements

    Télécharger
  • stl

    CelticTriangle_075in.stl

    398 Ko · 432 téléchargements

    Télécharger
  • stl

    CelticTriangle_2in.stl

    590 Ko · 435 téléchargements

    Télécharger

Description

This is an embossing plate for a celtic knot.

It can be used for impressing the pattern on polimer clay or leather.

Impression profile is only 0.5mm wide and protrude only 1mm above 3mm thick base plate so it does not break under pressure when you use a clamp to press it into leather.

Several sizes are exported as different STLs (each with 0.5mm wide profile) because simply scaling it for printing will increase the width of the impression lines and specifically produce multiple lines as FDM printers will most likely use multiple shells to print them.