Dancing Groot
par Cordavi
Fichiers imprimables (9)
-
stlgroot_dancing_no_supports.stl
10.1 Mo · 102 754 téléchargements
-
stlgroot_figure_no_supports.stl
2.8 Mo · 89 737 téléchargements
-
stl
groot_nobase_no_supports.stl
7.8 Mo · 88 830 téléchargements
-
stl
Dual_Extruder_only_groot.stl
1.2 Mo · 87 761 téléchargements
-
stl
Dual_Extruder_only_groot_2.stl
8.9 Mo · 87 834 téléchargements
-
stl
groots_head.stl
12.6 Mo · 87 121 téléchargements
-
stl
groots_head_body.stl
41.6 Mo · 87 174 téléchargements
-
stl
groots_head_body_no_pot.stl
29.5 Mo · 87 192 téléchargements
-
stl
DancingGroot_LooseFit.stl
10.1 Mo · 86 069 téléchargements
Description
I downloaded the Baby Groot model posted by landsharkxx (http://www.thingiverse.com/thing:436968) and wanted to remix it and see if I could make it print easier with little or no supports. (Printing with PLA and an active cooling fan.)
I took the time to adjust the areas with overhangs, thicken his thin features, and resculpt in detail and add some leafs.
I was able to put him in a pot with a print in place part that allows him to wiggle around as if he was dancing. Video here: http://youtu.be/Qk9saWm2xM0
I used Meshmixer, Sculptris, and 123D Design. Print tested on a MakerBot Replicator 2. No supports or raft needed.