Logging Trailer
par Todd_Grady
Fichiers imprimables (17)
-
stlHeadboard_holes.stl
385 Ko · 1 102 téléchargements
-
stlPosts_Laying_Down_holes.stl
197 Ko · 1 105 téléchargements
-
stl1_airbag_bottom_fitting.stl
104 Ko · 1 068 téléchargements
-
stl2_airbag_top_fitting.stl
60 Ko · 1 072 téléchargements
-
stl3_upright.stl
72 Ko · 1 070 téléchargements
-
stl4_swing_arm.stl
70 Ko · 1 103 téléchargements
-
stl5_airbag.stl
436 Ko · 1 071 téléchargements
-
stlWheel_Chock_Holder.stl
39 Ko · 1 071 téléchargements
-
stlWheel_Chock.stl
283 Ko · 1 099 téléchargements
-
stlSide_Clearance_Light_Holder_5x2mm.stl
45 Ko · 1 076 téléchargements
-
stlTrailer_Light_Complete_Level_Set.stl
494 Ko · 1 114 téléchargements
-
stlRear_Light_Lens.stl
63 Ko · 1 097 téléchargements
-
stlRear_Crossmember_ONLY.stl
4.4 Mo · 1 120 téléchargements
-
stlB6_Axle_Housing_120mm.stl
117 Ko · 1 097 téléchargements
-
stlB1_Axle_Housing_120mm.stl
100 Ko · 1 095 téléchargements
-
stl140mm_axle_end_cap.STL
98 Ko · 1 095 téléchargements
-
stl140mm_half_axle_tube.STL
252 Ko · 1 098 téléchargements
Description
Parts required to 3d print and scratch build your own Logging Trailer.
Suits 1/14 scale Tamiya & Hercules Hobby RC Trucks.
All parts were printed in PLA Plus from 3D Fillies.
Aluminium rails were also scratch built from a 6.5m length of mill finish aluminium extrusion 40mm x 20mm x 1.6mm unequal angle.
In Australia this is available from Capral Aluminium.
Aluminium is docked at 1000mm, then using Tamiya/Hercules Hobby trailer rails, are then profiled to the same shapes, front & rear.
(You can of course make them any length you wish)
3d print "Air Bag suspension" type files are included.
As is, a rear light set.
(LED buckets & fitting brackets, and lenses)
There is also a Side Clearance Light holder too.
It holds a 5 x 2mm LED.
(Yellow ones are available from Jaycar in Australia.)
Both length trailer axle tubes are included; 120mm and 140mm too.
Just choose whichever width plastic tube that you want on your trailer.
Metal parts are identical internally.
Extra parts required to finish trailer;
King pin and plate.
C2 & C5 Tamiya trailer parts (to fit plate above)
Internal metal parts of axles.
Rims & tyres to suit axle size.
Assorted hardware.