Easter Eggs
par _Steve
Fichiers imprimables (9)
-
stlEgg1.stl
1.4 Mo · 433 téléchargements
-
stlEgg2.stl
2.6 Mo · 446 téléchargements
-
stlEgg3.stl
1.8 Mo · 424 téléchargements
-
stlEgg4.stl
2.2 Mo · 421 téléchargements
-
stlEgg5.stl
2.3 Mo · 423 téléchargements
-
stlEgg6.stl
1.2 Mo · 427 téléchargements
-
stlEgg7.stl
2.1 Mo · 423 téléchargements
-
stlEgg8.stl
2.7 Mo · 420 téléchargements
-
stlEgg9.stl
3.3 Mo · 425 téléchargements
Description
Easter is near so I thought I would design some eggs. Hope these are not to late to print and have some fun with!
These can be printed in vase mode or normal mode with 0% infill. They are hollow which will save using some filament. Each egg has the x and y axis at 54 mm and z is 70 mm tall. I haven't printed all 9 designs, only the 5 pictured, but they all should print fine. The tops of the eggs didn't close well in vase mode, normal mode printed the best. I used a 5 mm brim but I suppose a raft will also work. The base of the egg has a small foot print.
Enjoy....
Notes are below.