Fully-Printed Parallel Pliers
par ArteusDesignWorks
Fichiers imprimables (9)
-
stljaw-2x.stl
57 Ko · 676 téléchargements
-
stl
jaw-mainpin-B-1x.stl
165 Ko · 670 téléchargements
-
stl
grip-A-x2.stl
203 Ko · 671 téléchargements
-
stl
jaw-forepin-B-2x.stl
181 Ko · 669 téléchargements
-
stl
jaw-mainpin-A-1x.stl
277 Ko · 664 téléchargements
-
stl
grip-standoff-x2.stl
108 Ko · 669 téléchargements
-
stl
jaw-forepin-A-2x.stl
293 Ko · 666 téléchargements
-
stl
grip-pin-x8.stl
175 Ko · 664 téléchargements
-
stl
grip-B-x2.stl
204 Ko · 666 téléchargements
Description
Video demo:
https://www.youtube.com/shorts/qCJScryiVMY
At the end of each filename, you'll see a count (1x, 2x, etc). Print that number of the given part in the provided orientation, or whatever seems best to you.
Print with 3-4 walls, 100% infill on the grips, 40% gyroid infill on the jaws, and 10% gyroid or grid on the grip offsets.
I also recommend securing the grip pins using CA glue or your strong adhesive of choice. PLA tends to take 2-part epoxy fairly well.
I've made the front pins threaded so custom-made jaws can be created and they can be swapped out at will. Go nuts!
This design is a shameless copy of Pask Make's parallel pliers. You can watch his video here:
https://www.youtube.com/watch?v=AOhupt318Fs