Ghostface hueforge

a ghostface portrait in hueforge format

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Marine Blue
At layer #7 (0.64mm) swap to Blue Gray
At layer #10 (0.88mm) swap to Jade White for the rest.