(Stackable Series) - Shutter Box

A simple stackable storage system with Shutter doors style, simple and easy print.

This is part of My ongoing Stackable Series, you can find links below and stack them as you want.

-Shutter Door box: https://www.thingiverse.com/thing:6505915

-Wooden Doors Box: https://www.thingiverse.com/thing:6617309

-Tilt Doors Box: https://www.thingiverse.com/thing:6617446

-Drawer Box: Coming Soon.

-More ideas will be coming in the future.

Just a simple print and assemble with no need to use screws.

Print the connecter STL file to connect other boxes from the stackable series.

i left a fitting test for the frame to test the assemble before spending hours on the Case box to see if your machine tolerances and suitable for the print.

Stackable Shutter Box can be combined with multiple boxes on all sides.
i have left some tolerance for easy and semi tight installation of the interlocks.

Printing:
Support: Not needed, but you can if your supports clean smoothly with no leftovers.

Print Orientation:
Lay flat on the closed back end of the box.

Assembly:
Just use the interlocks to join multiple boxes.