Automatic Print Ejector - The Punching Machine
par MatterHackers
Fichiers imprimables (10)
-
stlOpenBeam_L.STL
41 Ko · 8 697 téléchargements
-
stlReverse_Gear.STL
75 Ko · 8 619 téléchargements
-
stlGear.STL
37 Ko · 8 659 téléchargements
-
stlHalf.STL
23 Ko · 8 661 téléchargements
-
stlEnd.STL
31 Ko · 8 685 téléchargements
-
stlLinkage.STL
31 Ko · 8 829 téléchargements
-
stlwades_small_gear.stl
289 Ko · 8 580 téléchargements
-
stlStand.STL
28 Ko · 8 644 téléchargements
-
stlDrive.STL
90 Ko · 8 709 téléchargements
-
stlBoxing_Glove_2.stl
899 Ko · 8 977 téléchargements
Description
Achieve 3D printer autonomy by adding an Automatic Print Ejector to your machine. This mechanism will knock the printed part off the bed when it is finished printing. We like to call it the punching machine, Check the video above to see why.
For a complete component list and assembly instructions head to this write up: http://www.matterhackers.com/store/digital-designs/automatic-print-ejector-the-punching-machine
Developed by the MatterHackers Engineering Team - the Punching Machine gives your printer the ability to remove the printed part from the bed without any human interaction. See it in action Here: https://www.youtube.com/watch?v=Viy928RLsdU
- Printing Recommendations -
All parts were printed with MatterHackers Pro Series PLA. http://www.matterhackers.com/store/3d-printer-filament?t=1.75mm%20PRO%20Series%20PLA
Recommended Print settings:
- Layer Height: 0.2 mm Layers
- Perimeters: 2 Perimeters
- 30% Infill