Customizable hexagonal shelves
door gpvillamil
Printbare bestanden (7)
-
stlhex_2x_open.stl
82 Ko · 8 496 downloads
-
stlhex_2x_closed.stl
82 Ko · 8 456 downloads
-
stlhex_2x_foot_open.stl
97 Ko · 8 430 downloads
-
stlhex_2x_foot_open_mirrored.stl
31 Ko · 8 408 downloads
-
stlhex_2x_hanger_open.stl
105 Ko · 8 432 downloads
-
stlhex_3x_closed.stl
116 Ko · 8 470 downloads
-
stlhex_3x_open.stl
116 Ko · 8 454 downloads
Beschrijving
Inspired by several of the shelving systems here on Thingiverse, this is a customizable system for creating hexagonal shelves. (I'd list the sources but it looks like the search function for remixes is not working???)
The big difference here is that it is done as a script in OpenSCAD so you can very easily adapt it to different thicknesses of material, screws, etc.
By default it is set to work with 1/4" plywood, and #8 self-tapping screws to secure it.
It is possible to generate the brackets either "open" or "closed" - the latter fills in one side of the bracket and is probably stronger.
One (recommended) change is to make the thickness of the bracket an exact multiple of your layer width. For example, if you make it 2.4 mm and print it with 3 shells, you will get a piece that consists entirely of shells, which will look good and be strong.