PID Controller Case

door AndrewOlvera

Printbare bestanden (3)

  • stl

    PIDFrontCase.stl

    1.5 Mo · 1 829 downloads

    Downloaden
  • stl

    BackCase.stl

    396 Ko · 1 762 downloads

    Downloaden
  • stl

    Foot.stl

    591 Ko · 1 695 downloads

    Downloaden

Beschrijving

This is a case for a Berme Rex-C100 PID controller. This case is long enough for the Berme controller which is longer than other PID controllers.

Parts needed are:
Berme PID controller
Solid State Relay and heat sink
Rocker Switch for 19mmX13mm hole
AC receptacle for 28mmX20mm hole
AC outlet for 24mmX23mm hole (Snap in type)
K type Connector (HMPW-K-F) Put screw through hole to secure.
Wire
Countersunk Screws 4-40 or M3
Screws for heat sink
Screws for feet
Optional Feet or print from file