Hypercube Evolution Additions/Mods
door -Josh-
Printbare bestanden (11)
-
stlBLTouch_mount_V3.stl
134 Ko · 9 019 downloads
-
stlBed_Bracket_15-45_slotted.stl
215 Ko · 8 613 downloads
-
stlBed_Bracket_45_slot_short.stl
215 Ko · 8 609 downloads
-
stlSpacers_long.stl
6 Ko · 8 647 downloads
-
stlSpacers_short.stl
3 Ko · 8 539 downloads
-
stlcut_multi_dim.stl
523 Ko · 8 548 downloads
-
stlcut_jig.stl
8 Ko · 8 565 downloads
-
stlRetainer_1.1.stl
174 Ko · 8 552 downloads
-
stlBLTouch_lava_Mount.stl
134 Ko · 8 611 downloads
-
stlRetainer_1.2.stl
176 Ko · 8 668 downloads
-
stlX_Carriage_igus_rjzm-01-08.stl
1.8 Mo · 8 570 downloads
Beschrijving
I'll try to modify these if I get feedback.
Other Hypercue Usefule Things from me:
https://www.thingiverse.com/thing:2426811
-BLTouch Mount V3, this should not require modifications to the original carrier and should be interchangeable with an inductive sensor. Its meant to use a 3mm Tap on the plastic and the screw kit recommended should have M3 screws that will suit this purpose.
-45mm Bracket Slotted with a 15mm long slot, this was requested on facebook. This might limit your nut selection.
-100mm Spacer for easy of assembling dual Z-axis frame
-100mm Spacer for easy of assembling dual Z-axis frame, that only prints at 118mm long
-3030 3D joined connector Endcaps and Endcaps: https://www.thingiverse.com/thing:2426811
-10mm Cut Jig for silicone tube heated bed supports and 10, 11, 12, and 13 mm cutting jig, just put a second razor in the end of the distance you need.
-"Retainer_1.1" Hot End Retainer that is 1mm thinner. The stock one did not grip my hot end, so took a little off and now grips tightly
-BLTouch Mount for use with the E3D Lava hot end, which is 8mm taller.
-"Retainer_1.2" Hot end retainer with 1mm removed like #7, but with a little deeper radius on the sensor holder cutout. Same diameter, just 0.75mm deeper.
- -X-Carriage for Igus RJZM-01-08. Despite these being supposed drops for the LM8UU, I found the diameter to be 1mm thicker than my LM8UU and edited this part accordingly.