Hypercube Evolution inclosure

door Adamw88

Printbare bestanden (7)

  • stl

    Air_filter_house.stl

    80 Ko · 1 301 downloads

    Downloaden
  • stl

    Back_side_of_hinge_door_knob.stl

    80 Ko · 1 286 downloads

    Downloaden
  • stl

    Door_knob.stl

    134 Ko · 1 298 downloads

    Downloaden
  • stl

    Hinge_part_1.stl

    82 Ko · 1 302 downloads

    Downloaden
  • stl

    Hinge_part_2.stl

    83 Ko · 1 291 downloads

    Downloaden
  • stl

    Full_Graphic_Smart_Controller_box.stl

    117 Ko · 1 303 downloads

    Downloaden
  • stl

    Full_Graphic_Smart_Controller_boton.stl

    119 Ko · 1 299 downloads

    Downloaden

Beschrijving

The inclosing is adjusted to an external size of 480x470X600,
Which means a standard print size of 300X300 but the Z extrusions were extended to 600 mm
In addition, the lower extrusions were lowered by 10 mm from the original distance as well as the middle ones.
Two magnets of 20X10X3 are needed.

It's still work in progress, More updates will follow.

Tags

#hypercube evolution