Devils' cube
door eristhenis
Printbare bestanden (8)
-
stlBlack_stick_1.stl
2 Ko · 454 downloads
-
stlJoint_1.stl
2 Ko · 462 downloads
-
stlJoint_2.stl
2 Ko · 462 downloads
-
stlRed_stick_3.stl
2 Ko · 466 downloads
-
stlRed_stick.stl
684 o · 464 downloads
-
stlRed_stick_1.stl
2 Ko · 458 downloads
-
stlRed_stick_2.stl
2 Ko · 460 downloads
-
stlBlack_stick_2.stl
2 Ko · 459 downloads
Beschrijving
I' ve seen a wooden puzzle like this at a friends house and I liked it a lot but I could find one to buy so I decided to make one.
In order to print it you will need 33 items but only 8 STL files needed.
black filament:
4 x Black_stick_1.stl
4 x Black_stick_2.stl
4 x Joint_1.stl
4 x Joint_2.stl
red filament:
4 x Red_stick_1.stl
4 x Red_stick_2.stl
4 x Red_stick_3.stl
1 x Red_stick.stl
2 x Joint_1.stl
2 x Joint_2.stl
If you print it at 100% it will be very tight and will be difficult to assemble it, although, after 4 times, it is no problem. I suggest to scale it to 110-120%.