Bath Interferometer

door gr5

Printbare bestanden (10)

  • stl

    base_v57.stl

    73 Ko · 129 downloads

    Downloaden
  • stl

    paper_holder.stl

    354 Ko · 992 downloads

    Downloaden
  • stl

    isocket44.stl

    260 Ko · 119 downloads

    Downloaden
  • stl

    cube_holder_15mm_v39c.stl

    23 Ko · 118 downloads

    Downloaden
  • stl

    iball20.stl

    121 Ko · 119 downloads

    Downloaden
  • stl

    lens_holder_6x3.8_v53e.stl

    62 Ko · 117 downloads

    Downloaden
  • stl

    lens_holder_6x1.2_v53d.stl

    45 Ko · 118 downloads

    Downloaden
  • stl

    cube_holder_14.5mm_v39c2.stl

    22 Ko · 117 downloads

    Downloaden
  • stl

    lens_holder_7.6X3_v51a.stl

    40 Ko · 119 downloads

    Downloaden
  • stl

    laser_holder_v42.stl

    180 Ko · 117 downloads

    Downloaden

Beschrijving

Dale's Interferometer is great but it had 3 different screw sizes (imperial). I standardized on one size: M3 (metric 3mm) which I have tons of and are at my local home depot. Also I added a paper holder.

Some parts are stronger or need less material to print than original. Some corners were rounded so brim isn't necessary (e.g. the base).

I sell the metal parts for this or have information where you can get them and optical parts on your own. Also I have assembly and usage videos for this and the xyz table. All here:
http://gr5.org/bath/

All screw holes should be drilled with a 7/64th drill bit.

See printing notes.