Eagle Mask
door ThreeForm
Printbare bestanden (3)
-
stlEagle_Mask.stl
2.8 Mo · 14 839 downloads
-
stlEagle_Mask_4x_group.stl
11 Mo · 12 748 downloads
-
stlEagle_mask_with_support.STL
2.8 Mo · 13 183 downloads
Beschrijving
The Eagle Mask was designed for ThreeForm performers at Maker Faire. Now you can print it at home for Halloween or other events. This version has been redesigned for extrusion printers that lack soluble support material. A version with a support piece has been added for increased reliability. It has wall thickness of 2mm in the thin areas and 4mm in the thick areas. It occupies two cubic inches of volume. A small ThreeForm logo has been added on the cheek area, not shown in the renderings.