Programmable combination lock

door nivs1978

Printbare bestanden (14)

  • stl

    Programming_pin.stl

    7 Ko · 20 685 downloads

    Downloaden
  • stl

    Hook.stl

    10 Ko · 20 618 downloads

    Downloaden
  • stl

    Inner_spindel.stl

    142 Ko · 20 628 downloads

    Downloaden
  • stl

    Latch.stl

    169 Ko · 20 627 downloads

    Downloaden
  • stl

    Drive_cam.stl

    414 Ko · 20 617 downloads

    Downloaden
  • stl

    Dial.stl

    1.2 Mo · 20 618 downloads

    Downloaden
  • stl

    Case.stl

    177 Ko · 20 609 downloads

    Downloaden
  • stl

    Outer_spindel.stl

    218 Ko · 20 613 downloads

    Downloaden
  • stl

    Lever_Pin.stl

    140 Ko · 20 652 downloads

    Downloaden
  • stl

    Wheel_B.stl

    1.1 Mo · 20 590 downloads

    Downloaden
  • stl

    Spacer.stl

    283 Ko · 20 601 downloads

    Downloaden
  • stl

    Wheel_A.stl

    1 Mo · 20 587 downloads

    Downloaden
  • stl

    Dial_house.stl

    463 Ko · 20 571 downloads

    Downloaden
  • stl

    Lever.stl

    439 Ko · 20 569 downloads

    Downloaden

Beschrijving

This is a programmable combination lock. Insert the pins on the program wheels to make the combination lock open by different combination digits. The dial goes from 0 to 39.
This combination lock uses the same dial to enter the code and open the latch, unlike other combination locks found on Thingiverse. You can built this into your own safe door, or use the supplied case, meant for demonstrating how a combination lock works.

You should turn the dial 4 times counter clockwise to the first number, 3 times clockwise to the second number, two times counter clockwise to the third and then clockwise until the latch opens.

Watch this video to get details how a combination lock works and how to dial the numbers: https://www.youtube.com/watch?v=jz2WVSoQBxM