Programable Cryptex
door richards
Printbare bestanden (20)
-
stlcryptex_end.stl
819 Ko · 10 748 downloads
-
stlcryptex_core_tube.stl
170 Ko · 10 807 downloads
-
stlcryptex_centeral_support.stl
43 Ko · 10 717 downloads
-
stlcryptex_spacer_ring.stl
42 Ko · 10 627 downloads
-
stlcryptex_spacer_lock.stl
45 Ko · 10 579 downloads
-
stlcryptex_ring1.stl
418 Ko · 10 667 downloads
-
stlcryptex_assembly.stl
3.1 Mo · 10 303 downloads
-
stlcryptex_ring1_x5.stl
2 Mo · 10 381 downloads
-
stlcryptex_spacer_ring_x5.stl
192 Ko · 10 302 downloads
-
stlcryptex_skull_end.stl
1 Mo · 10 309 downloads
-
stlcryptex_ring2.stl
190 Ko · 10 550 downloads
-
stlcryptex_ring2_x5.stl
902 Ko · 10 342 downloads
-
stlcryptex_ring2_ns.stl
180 Ko · 10 469 downloads
-
stlcryptex_spacer_ring_inlay.stl
57 Ko · 10 326 downloads
-
stlcryptex_spacer_lock_inlay.stl
39 Ko · 10 361 downloads
-
stlcryptex_ring1_inlay.stl
345 Ko · 10 364 downloads
-
stlcryptex_centeral_support_6.stl
41 Ko · 8 171 downloads
-
stlcryptex_centeral_support_7.stl
39 Ko · 8 205 downloads
-
stlcryptex_core_tube_6.stl
191 Ko · 8 199 downloads
-
stlcryptex_core_tube_7.stl
180 Ko · 8 238 downloads
Beschrijving
There are many cryptex models around, but this one can be set to any 5 letter word you want.
NEW
If you have a larger print bed than my little 120mm one you can now print 6 or 7 letter cryptex! Just use cryptex_central_support_6 and cryptex_core_tube_6 for 6 letters and their _7 versions for 7. Dont forget to print extra letter rings.
NEW: Alternative skull end, a combination of the original ball end and thing:11953 - elvis the printable skull. Perfect for a pirate themed cryptex. NOTE: Print at 50% size to match the rest of the parts (CAD package would not shrink Elvis)
New2: Ring2 now features anti-pick features. This makes trying to guess the code by testing the resistance of the rings to turning much more difficult.
Folk who have already printed ring2 can add these features by filling 0.5mm groves into the sides.
Alternative ring1 added with reversed letters for easier printing. I found this more difficult to get a good paint finish, but I'm not too good with a brush. Print with inlay versions of locking ring and spacer ring.