Customizable Case (Rectangular)
door walter
Printbare bestanden (3)
-
stl5x_SD_card_case.stl
568 Ko · 37 096 downloads
-
stlGigaPower_Stove_Case.stl
493 Ko · 37 356 downloads
-
stl6x_SD_card_case.stl
565 Ko · 36 693 downloads
Beschrijving
Rectangular case generator. The inset lid is held in place with friction so using thicker layers can help to keep the case closed (I'm using 200 micron layers).
The hinge flexes so flexible plastics will work better for this design (I'm using MadeSolid PET+), but less flexible materials may also work (I haven't tried ABS or PLA, but making the hinge longer or thinner may help).
Printer:
--Afinia H480*
Filaments:
-- MadeSolid Clear PET+
-- MadeSolid Blue PET+
*affiliate link