Push Block

door CliffGlanz

Printbare bestanden (7)

  • stl

    MainBody.stl

    79 Ko · 2 354 downloads

    Downloaden
  • stl

    Handle.stl

    46 Ko · 2 308 downloads

    Downloaden
  • stl

    CenterLeg.stl

    12 Ko · 2 287 downloads

    Downloaden
  • stl

    Leg.stl

    45 Ko · 2 290 downloads

    Downloaden
  • stl

    ThumbScrew.stl

    79 Ko · 2 292 downloads

    Downloaden
  • stl

    OvalWasher.stl

    21 Ko · 2 281 downloads

    Downloaden
  • stl

    PushHeal.stl

    15 Ko · 1 718 downloads

    Downloaden

Beschrijving

3D Push Block for wood working.
Print all parts. Only the Main Body need supports in the hex area. All other parts print with no supports if oriented properly.

Glue 1/4"-20 nuts into the hex openings on the main body & skinny legs. I used Hillman brand nuts and screws purchased at HomeDepot. The nuts are 0.185" thick. Glue something very grippy to the bottom of the Center Legs and skinny legs. I used Drywall sanding pads and super glue.

Main Body = 1
Center Leg=1
Leg=2
Handle=1
Oval Washer=4
ThumbScrew=2
Push Heal = Optional

Print Settings:
2 Walls
2 Top
2 Bottom
20 % infill

Tags

#grr-ripper #Microjig #Push block #PushBlock #Tablesaw #woodworking