Serving jig Bowstring

door vuXaidu8

Printbare bestanden (3)

  • stl

    bowstringJig-spacer.stl

    35 Ko · 423 downloads

    Downloaden
  • stl

    bowstringJig-MainBody.stl

    285 Ko · 428 downloads

    Downloaden
  • stl

    bowstringJig-wheel.stl

    62 Ko · 417 downloads

    Downloaden

Beschrijving

Layer height 0.3 if you want it fast. 0.2mm otherwise.
I recommend infill 100%.
No supports needed

You will need:

  • M6x70mm and nut (or 80mm M6 threaded rod with nut and nylon nut)
  • L59mmxD4.2mm rods. 3 pieces. Just edit the freecad file if you need another diameter.
  • Glue, to glue the rods permanently.

Tools:

  • Drill bit of around 1mm to drill the hole of the thread.

Notes:

  • Print with recommended settings.
  • Glue the squared 'bodyCover' after puting the 3 rods
  • You can also glue the nut to the turning wheel if you want.
  • This will fit a spool with a diameter hole of 10mm and length of 49mm

Tags

#archery #Bowstring #diy