Sequential Shifter
door The_Custom_Side
Printbare bestanden (14)
-
stlConnector_half_pins.stl
61 Ko · 433 downloads
-
stlInner_spring_holder.stl
92 Ko · 429 downloads
-
stlHandle_connector.stl
149 Ko · 435 downloads
-
stlinterlocker.stl
73 Ko · 434 downloads
-
stlPusher_puller.stl
100 Ko · 429 downloads
-
stlLower_inserts.stl
113 Ko · 432 downloads
-
stlLever.stl
263 Ko · 436 downloads
-
stlpush_connectors.stl
124 Ko · 430 downloads
-
stlside_cvrs_1.stl
255 Ko · 442 downloads
-
stlMount.stl
326 Ko · 429 downloads
-
stlside_cvrs.stl
651 Ko · 435 downloads
-
stlHandle.stl
1.1 Mo · 431 downloads
-
stlside_attachments.stl
42 Ko · 434 downloads
-
stllower_plate.stl
118 Ko · 434 downloads
Beschrijving
This is a mini sequential shifter that I've designed and made for my sim racing rig. Please find the attached video for the overview. I have mainly used PETG and PLA for the build.
The following components have to be printed in multiple numbers:
- Push connector x2
- Inner spring holder x4
- Connector half pins x4
- Inter Locker x4 (as per your preference)
- Side attachment x2
Please note that the side attachment and lower plate are for securing the arrangement to a table top.
A M4 x 50mm screw and nut, M5 x 35mm screw and nut (3 no.s) is required and several sets of M3 screw and nuts are required (approx.14).
Watch : https://www.youtube.com/watch?v=JtILAiM3eyM for the overview.