Socket Trays
door handsomeharold
Printbare bestanden (22)
-
stl38_Drive_Spark_Plug.stl
760 Ko · 1 016 downloads
-
stl38_Drive_Torx_Bits.stl
5.5 Mo · 1 014 downloads
-
stl38_Drive_Metric_Hex.stl
3.5 Mo · 1 096 downloads
-
stl38_Drive_SAE_Hex.stl
3.8 Mo · 986 downloads
-
stl14_Drive_Bit_Sockets.stl
7.1 Mo · 1 044 downloads
-
stlMetric_1_2_Drive_Shallow_12_Point.stl
2.1 Mo · 1 031 downloads
-
stlMetric_1_2_Drive_Shallow.stl
6.2 Mo · 959 downloads
-
stlMetric_1_2_Drive_Deep.stl
6.8 Mo · 1 020 downloads
-
stlMetric_3_8_Drive_Shallow.stl
7.2 Mo · 1 063 downloads
-
stlMetric_3_8_Drive_Deep.stl
9.7 Mo · 1 084 downloads
-
stlSAE_12_Drive_Shallow_12_POINT.stl
2.1 Mo · 930 downloads
-
stlSAE_1_2_Drive_Shallow.stl
6 Mo · 955 downloads
-
stlSAE_1_2_Drive_Deep.stl
6.7 Mo · 963 downloads
-
stlSAE_3_8_Drive_Shallow.stl
8.3 Mo · 971 downloads
-
stlSAE_3_8_Drive_Deep.stl
7.7 Mo · 655 downloads
-
stl8_Drive_Spark_Plug_Sockets.stl
1.6 Mo · 111 downloads
-
stl8_Drive_Oil_Filter_Sockets.stl
3.1 Mo · 112 downloads
-
stl12_Drive_Non_Marring_Impact_Sockets.stl
3.6 Mo · 111 downloads
-
stl14_SAE_Deep.stl
1012 Ko · 114 downloads
-
stl14_SAE_Shallow.stl
1.2 Mo · 115 downloads
-
stl12_Metric_Impact_Sockets.stl
3.9 Mo · 115 downloads
-
stl8_Drive_Extraction_Sockets.stl
2.9 Mo · 111 downloads
Beschrijving
Modeled my own trays based on the original design for the 1/4" sockets. I sized them to fit perfectly in the drawers together of a 27x18" tool chest drawer, but could obviously be used in any drawer. The corners are also cut on the larger trays to allow them to all fit on the build plate of an X1C (256x256mm) in 1 piece. Printed with a filament change to easily highlight labels and to give me a method for color coding.
the sockets are a "master set" of Maximum sockets from Canadian Tire, and the spark plug extension sockets are "Mixpower" from Amazon.
If you make these trays for yourself, id love to see you post a make!