A Fully Printable Microscope
door kwalus
Printbare bestanden (12)
-
stlhead.stl
201 Ko · 20 148 downloads
-
stlkodak_obj.stl
53 Ko · 20 074 downloads
-
stlfuji_obj.stl
55 Ko · 20 003 downloads
-
stlfuji_racklid1.stl
169 Ko · 20 028 downloads
-
stlkodak_racklid2.stl
149 Ko · 19 988 downloads
-
stlfuji_racklid2.stl
150 Ko · 19 924 downloads
-
stlpost.stl
24 Ko · 20 065 downloads
-
stlpinion.stl
319 Ko · 19 988 downloads
-
stlkodak_racklid1.stl
166 Ko · 19 933 downloads
-
stlfocus_knob.stl
842 Ko · 19 987 downloads
-
stlstage.stl
422 Ko · 19 956 downloads
-
stlstand.stl
914 Ko · 20 050 downloads
Beschrijving
Well almost, you still need to locate 4 lenses from some disposable cameras and a light source.
For the light source use an LED or mirror, whatever you have. I used a cheap LED wall light from Wal-Mart.
For the lenses, I went to a local photography shop and they were very kind to give me an entire bag full (Thank you Lens and Shutter! http://www.lensandshutter.com/). Since I had so many, I designed it to work with them all. There is a different optical tube that you have to print for the Fujifilm lenses (11.9mm outer diameter) vs. the Kodak lenses (13.2mm outer diameter). It should work with the following as I measured them all and will likely work with others as well:
(CAUTION there is a significant shock hazard if you plan to open a flash camera from the capacitor!)
Fujifilm QuickSnap Outdoor
Fujifilm QuickSnap Flash
Fujifilm Flash
Kodak FunSaver Flash
Kodak unaned
Kodak Max Outdoor
I will try to keep an updated list of potential online sources for these lenses and other components at Project.Parts:
https://project.parts/project/77450/
The magnification of this microscope is expected be near 74x (still need to confirm precisely).
Upgrades:
Focus Lock: : http://www.thingiverse.com/thing:85698
Smartphone Adapter: http://www.thingiverse.com/thing:92355
This project was also inspired by this excellent project: http://www.funsci.com/fun3_en/ucomp1/ucomp1.htm
and this: http://www.thingiverse.com/thing:31632