Modular Model Rocket
door Landru
Printbare bestanden (13)
-
stl1.75in_Blank_Fincan.STL
948 Ko · 52 758 downloads
-
stl1.75in_Body_Tube_With_Lug.STL
1 Mo · 52 283 downloads
-
stl1.75in_body_tube.STL
473 Ko · 52 493 downloads
-
stl1.75in_Nosecone_Conical.STL
414 Ko · 50 592 downloads
-
stl1.75in_Nosecone_Hemispherical.STL
2.2 Mo · 49 922 downloads
-
stl1.75in_Nosecone_Ogive.STL
2.1 Mo · 53 369 downloads
-
stl1.75in_Nosecone_Spherical.STL
2.9 Mo · 49 764 downloads
-
stl1.75inx18mm_Angled_2xCluster_Fincan.STL
2.6 Mo · 50 336 downloads
-
stl1.75inx18mm_Twister_Fincan.STL
3.9 Mo · 50 462 downloads
-
stl1.75inx24mm_Standard_Fincan.STL
2.1 Mo · 51 067 downloads
-
stl1.75inx24mm_Twister_Fincan.STL
4 Mo · 50 335 downloads
-
stl1.75in_Nosecone_Coupler.STL
383 Ko · 52 125 downloads
-
stl1.75inx18mm_Standard_Fincan.STL
691 Ko · 50 669 downloads
Beschrijving
NEW! as of June 17.
This is now a complete modular rocket system!
Pick a nosecone, body tube(s), fincan, nosecone coupler, and voila! A semi custom printable rocket!
I plan to be adding new sections on a regular basis so check back often! Feel free to leave feedback if there is some feature you'd like to see that isn't up yet :)
Important dimensions to make compatible modules:
Tube Outside Diameter - 1.75in
Tube Inside Diameter - 1.667in
Coupler Tube Outside Diameter (tight): 1.663in
Coupler Tube Outside diameter (looser): 1.659in
NOTE: The designs are closely based on the Legacy design and should work well, but many of them are still untested. I'm working on it, though.