3D Printed Pendulum Clock
par OldManJohnson
Fichiers imprimables (41)
-
stlGear_Train_Shafts.stl
194 Ko · 4 365 téléchargements
-
stlAnchor_Esc_and_Spacers.stl
358 Ko · 4 356 téléchargements
-
stl5.5mm_Gauge_Block.stl
95 Ko · 4 132 téléchargements
-
stlBearing_Covers_x6.stl
422 Ko · 4 100 téléchargements
-
stlClock_Face_Mounting_Pins.stl
76 Ko · 4 419 téléchargements
-
stlClock_Hands.stl
188 Ko · 4 287 téléchargements
-
stlClock_Mounting_Ring_and_Sleeves.stl
459 Ko · 4 119 téléchargements
-
stlDoor_Hanger_4mm.stl
27 Ko · 4 068 téléchargements
-
stlDoor_Hanger_5mm.stl
27 Ko · 4 046 téléchargements
-
stlFrame_Left_Front.stl
716 Ko · 4 078 téléchargements
-
stlFrame_Left_Rear.stl
520 Ko · 4 077 téléchargements
-
stlFrame_Mid_Front.stl
604 Ko · 4 057 téléchargements
-
stlFrame_Mid_Rear.stl
345 Ko · 4 193 téléchargements
-
stlFrame_Right_Front.stl
514 Ko · 4 072 téléchargements
-
stlFrame_Right_Rear.stl
306 Ko · 4 072 téléchargements
-
stlFrame_Standoff_x6.stl
28.9 Mo · 4 128 téléchargements
-
stlPendulum_Bob_Body_and_Cover.stl
1.2 Mo · 4 062 téléchargements
-
stlPendulum_Connectors_x5.stl
10 Ko · 4 059 téléchargements
-
stlPendulum_Head.stl
104 Ko · 4 060 téléchargements
-
stlPendulum_Inserts_x6.stl
479 Ko · 4 050 téléchargements
-
stlPendulum_Shaft_Extension.stl
3 Ko · 4 050 téléchargements
-
stlPendulum_Yoke_and_Hanger.stl
196 Ko · 4 092 téléchargements
-
stlWeight_Drum_Ratchet.stl
274 Ko · 4 156 téléchargements
-
stlWeight_Drum_Top_and_Bottom.stl
340 Ko · 4 146 téléchargements
-
stlPendulum_Bob_Adjuster_and_Nut.stl
9.2 Mo · 4 115 téléchargements
-
stlWeight_Body_Extension.stl
1.9 Mo · 4 220 téléchargements
-
stlWeight_Drum_Top_Cover_and_Spacers.stl
6 Mo · 4 125 téléchargements
-
stlWeight_Screw_Bottom_x3.stl
2.8 Mo · 4 121 téléchargements
-
stlWeight_Screw_Top_x2.stl
1.9 Mo · 4 156 téléchargements
-
stlWeight_Body.stl
2 Mo · 4 016 téléchargements
-
stlClock_Face_with_Numerals.stl
2.1 Mo · 4 241 téléchargements
-
stlPendulum_Sections_x5.stl
17 Ko · 4 215 téléchargements
-
stlGear_3.stl
5.5 Mo · 472 téléchargements
-
stlGear_4.stl
5.9 Mo · 466 téléchargements
-
stlGear_5.stl
498 Ko · 456 téléchargements
-
stlGear_7-Pinion_7-Hub_and_Spacer.stl
9.7 Mo · 464 téléchargements
-
stlPinion_3_and_Spacers.stl
562 Ko · 469 téléchargements
-
stlPinion_4_and_Spacers.stl
492 Ko · 466 téléchargements
-
stlGear_2-Pinion_2_and_Spacers.stl
4 Mo · 477 téléchargements
-
stlGear_6-Pinion_6_and_Shaft.stl
8.8 Mo · 487 téléchargements
-
stlTiming_Gear-Pinion_1_and_Spacers.stl
6.7 Mo · 516 téléchargements
Description
I do enjoy making 3D models that actually DO something instead of just looking nice. A weight operated pendulum clock is certainly one of my favorites. This model, one of my newer designs, not only DOES something (it keeps time) but also looks good.
Most of the clock is 3D printed, but a few items still need to be purchased (I've not been able to print screws, bearings, nylon cord, or lead shot). Links to examples of each are included in the (very detailed) assembly instructions (PDF document).
The clock is 346mm (14in) wide and 1.3m (50in) tall (with the weights and pendulum) and has a run time between windings of about 36 hours.
All the parts were printed in PLA.
The maximum bed size needed is 188mm x 180mm.
UPDATE 01/10/26: The tooth counts for gears and pinions 6 and 7 were reversed in the text file 'Gear Train Timings.txt', The error has been fixed in the new file. This has no effect on the model.
UPDATE and CORRECTION 01/11/26: The model for the clock face (Clock_Face.STL) did not include the raised numerals that allow for two color printing. A new update model (Clock_Face_with_Numerals.STL) has been added and the assembly instructions updated.
UPDATE and CORRECTION 01/13/26: The models in the file Pendulum_Sections_x5.STL have been fixed so that the Pendulum Connectors will fit either end of the sections (one end of the pendulum section models in the previous upload was not the correct size).
UPDATE 02/23/26: Added a zip file ('Parts Modified for 624 Bearing.zip') containing parts that have been modified to use 624 bearings (4mm ID, 13mm OD, 5mm thick) instead of the 686 bearings. Note that none of these replacement parts have been tested. Use of these modified parts in place of the corresponding original parts is purely optional.