3D Printed Pendulum Clock
von OldManJohnson
Druckbare Dateien (41)
-
stlGear_Train_Shafts.stl
194 Ko · 4 375 Downloads
-
stlAnchor_Esc_and_Spacers.stl
358 Ko · 4 365 Downloads
-
stl5.5mm_Gauge_Block.stl
95 Ko · 4 143 Downloads
-
stlBearing_Covers_x6.stl
422 Ko · 4 109 Downloads
-
stlClock_Face_Mounting_Pins.stl
76 Ko · 4 429 Downloads
-
stlClock_Hands.stl
188 Ko · 4 297 Downloads
-
stlClock_Mounting_Ring_and_Sleeves.stl
459 Ko · 4 129 Downloads
-
stlDoor_Hanger_4mm.stl
27 Ko · 4 077 Downloads
-
stlDoor_Hanger_5mm.stl
27 Ko · 4 056 Downloads
-
stlFrame_Left_Front.stl
716 Ko · 4 087 Downloads
-
stlFrame_Left_Rear.stl
520 Ko · 4 086 Downloads
-
stlFrame_Mid_Front.stl
604 Ko · 4 066 Downloads
-
stlFrame_Mid_Rear.stl
345 Ko · 4 202 Downloads
-
stlFrame_Right_Front.stl
514 Ko · 4 081 Downloads
-
stlFrame_Right_Rear.stl
306 Ko · 4 082 Downloads
-
stlFrame_Standoff_x6.stl
28.9 Mo · 4 138 Downloads
-
stlPendulum_Bob_Body_and_Cover.stl
1.2 Mo · 4 072 Downloads
-
stlPendulum_Connectors_x5.stl
10 Ko · 4 069 Downloads
-
stlPendulum_Head.stl
104 Ko · 4 070 Downloads
-
stlPendulum_Inserts_x6.stl
479 Ko · 4 060 Downloads
-
stlPendulum_Shaft_Extension.stl
3 Ko · 4 060 Downloads
-
stlPendulum_Yoke_and_Hanger.stl
196 Ko · 4 101 Downloads
-
stlWeight_Drum_Ratchet.stl
274 Ko · 4 165 Downloads
-
stlWeight_Drum_Top_and_Bottom.stl
340 Ko · 4 155 Downloads
-
stlPendulum_Bob_Adjuster_and_Nut.stl
9.2 Mo · 4 125 Downloads
-
stlWeight_Body_Extension.stl
1.9 Mo · 4 229 Downloads
-
stlWeight_Drum_Top_Cover_and_Spacers.stl
6 Mo · 4 133 Downloads
-
stlWeight_Screw_Bottom_x3.stl
2.8 Mo · 4 129 Downloads
-
stlWeight_Screw_Top_x2.stl
1.9 Mo · 4 165 Downloads
-
stlWeight_Body.stl
2 Mo · 4 024 Downloads
-
stlClock_Face_with_Numerals.stl
2.1 Mo · 4 251 Downloads
-
stlPendulum_Sections_x5.stl
17 Ko · 4 225 Downloads
-
stlGear_3.stl
5.5 Mo · 480 Downloads
-
stlGear_4.stl
5.9 Mo · 474 Downloads
-
stlGear_5.stl
498 Ko · 464 Downloads
-
stlGear_7-Pinion_7-Hub_and_Spacer.stl
9.7 Mo · 473 Downloads
-
stlPinion_3_and_Spacers.stl
562 Ko · 477 Downloads
-
stlPinion_4_and_Spacers.stl
492 Ko · 475 Downloads
-
stlGear_2-Pinion_2_and_Spacers.stl
4 Mo · 487 Downloads
-
stlGear_6-Pinion_6_and_Shaft.stl
8.8 Mo · 496 Downloads
-
stlTiming_Gear-Pinion_1_and_Spacers.stl
6.7 Mo · 524 Downloads
Beschreibung
I do enjoy making 3D models that actually DO something instead of just looking nice. A weight operated pendulum clock is certainly one of my favorites. This model, one of my newer designs, not only DOES something (it keeps time) but also looks good.
Most of the clock is 3D printed, but a few items still need to be purchased (I've not been able to print screws, bearings, nylon cord, or lead shot). Links to examples of each are included in the (very detailed) assembly instructions (PDF document).
The clock is 346mm (14in) wide and 1.3m (50in) tall (with the weights and pendulum) and has a run time between windings of about 36 hours.
All the parts were printed in PLA.
The maximum bed size needed is 188mm x 180mm.
UPDATE 01/10/26: The tooth counts for gears and pinions 6 and 7 were reversed in the text file 'Gear Train Timings.txt', The error has been fixed in the new file. This has no effect on the model.
UPDATE and CORRECTION 01/11/26: The model for the clock face (Clock_Face.STL) did not include the raised numerals that allow for two color printing. A new update model (Clock_Face_with_Numerals.STL) has been added and the assembly instructions updated.
UPDATE and CORRECTION 01/13/26: The models in the file Pendulum_Sections_x5.STL have been fixed so that the Pendulum Connectors will fit either end of the sections (one end of the pendulum section models in the previous upload was not the correct size).
UPDATE 02/23/26: Added a zip file ('Parts Modified for 624 Bearing.zip') containing parts that have been modified to use 624 bearings (4mm ID, 13mm OD, 5mm thick) instead of the 686 bearings. Note that none of these replacement parts have been tested. Use of these modified parts in place of the corresponding original parts is purely optional.