Motion Control Rig Pillow Block

von anewsome

Druckbare Dateien (7)

  • stl

    Motor_Pillow_Block.STL

    528 Ko · 818 Downloads

    Herunterladen
  • stl

    Motor_Mount.STL

    52 Ko · 885 Downloads

    Herunterladen
  • stl

    Stubby_Bearing_Retainer.STL

    250 Ko · 819 Downloads

    Herunterladen
  • stl

    Motor_Clamp_-_Motor_Clamp-1.STL

    210 Ko · 803 Downloads

    Herunterladen
  • stl

    Tall_Pillow_Block.STL

    416 Ko · 817 Downloads

    Herunterladen
  • stl

    Motor_Clamp_-_Motor_Clamp-2.STL

    197 Ko · 807 Downloads

    Herunterladen
  • stl

    Bearing_Retainer.STL

    360 Ko · 822 Downloads

    Herunterladen

Beschreibung

A pillow block for a bearing and 3/8" shaft assembly with pulley.

Edit 2013/09/30: I've rebuilt my motion control rig and the pillow blocks used to hold the bearings, pulleys and motor. The new pillow block design features an integrated, threaded bearing retainer. No more need to use 3/8" collars on your shaft to keep the bearings in place and your 3/8" shaft centered.

The new pillow block design also includes hex keyed through holes for mounting the block. This eliminates the need to use self tapping screws in the bottom of the block, which really don't hold up after repeated breakdown / rebuild cycles.

Lastly, the motor side pillow block includes an integrated motor mount for a NEMA 17 geared stepper. I got mine from phidgets.com but you can get yours anywhere. Hopefully the pictures explain how all these parts come together to form the basis of a belt driven motion control system.

Good luck!