Pocket Operator Case
von crashdebug
Druckbare Dateien (7)
-
stlCase_Back_full_v5.stl
11 Ko · 36 272 Downloads
-
stlButton_v4.stl
78 Ko · 35 156 Downloads
-
stlCase_Front_full_v6_rotated.stl
377 Ko · 35 660 Downloads
-
stlCase_Front_full_v6_mic_alignment_test.stl
51 Ko · 34 260 Downloads
-
stlCase_Front_full_v6_mic_rotated.stl
408 Ko · 34 751 Downloads
-
stlButton_v4_x8.stl
408 Ko · 35 374 Downloads
-
stlButton_v4_x16.stl
488 Ko · 35 685 Downloads
Beschreibung
This is a case for the Pocket Operator series of synthesizers made by Teenage Engineering. Its main features are:
- Keys move freely
- LEDs are still visible
- Audio sockets accessible with standard sized rubberized jacks
- Possible to keep the break-away hanger if wanted
- Possible to keep the wire-stand attached
- No glue or screws
- Printable with low-end FDM printer
Source files are created with FreeCAD 0.15.
Note: A version of case, buttons and light guides optimized for SLS/SLA printing also available at shapeways: https://www.shapeways.com/shops/cdb
Compatible with these things:
- PO-20 symbol buttons: http://www.thingiverse.com/thing:1410100
- Numbered buttons: http://www.thingiverse.com/thing:1617681
- Light guides (difficult!): http://www.thingiverse.com/thing:2091660
- Mic Frontplate: https://www.thingiverse.com/thing:2779257
- Experimental eurorack frontplate: https://www.thingiverse.com/thing:3039287
- Button Customizer: https://www.thingiverse.com/thing:3668411
Compatible remixes and things by other people:
- Light guide buttons by Axeman72: https://www.thingiverse.com/thing:2090105
- Mini lever by RJ_12: https://www.thingiverse.com/thing:1489435
- PO-28 symbols by KingWarin: https://www.thingiverse.com/thing:3441682
Update (Jan. 30th 2018)
Added microphone holes to the front plate (Case_Front_full_v6_mic_rotated.stl) for the new PO series (PO-32, 33, 35).
Update Feb. 2018
Big thanks to the guy who sent a tip for the case. This is a first for me, feeling very humbled!
Update (Aug. 8th 2018)
Added experimental eurorack frontplate. (Thing 3039287)
Update (June 2nd 2019)
Added Button Customizer (Thing 3668411)