Condenser, Customizable
von KronBjorn
Druckbare Dateien (2)
-
stlcondenser_joint.stl
2.5 Mo · 2 896 Downloads
-
stlcondenser.stl
10.5 Mo · 2 937 Downloads
Beschreibung
A customizable slide-on condenser.
It is designed so that the cooling water is directly in contact with the tube for as long as possible.
The yellow silicone cap is from this build:
http://www.thingiverse.com/thing:1115059
Updates to come, stl's are being tested.
Status: PLA is not completely water tight, need some post processing.
Status: Glueing the two parts together with instant glue, and coating it with a single layer of epoxy glue, did the trick.