Simplistic Compass
von KristofferL
1 / 7
Druckbare Dateien (2)
-
stlCompass_Point.stl
319 Ko · 5 210 Downloads
-
stlCompass_Pencil.stl
485 Ko · 5 133 Downloads
Beschreibung
I needed a compass for school, so I decided to make my own. It is a simplistic design that works quite well, and fits most pencils.
Items needed:
- 3x Small M3 bolts
- 1x M3 nut
- 1x Small washer
- 1x M3 wingnut (I used a spare one from the heatbed on the Duplicator i3)
- A small piece of rubber. Used to provide friction between the two pieces of plastic. (I cut a piece from an old bicycle tube)