Stackable can dispenser
von distrubi
Druckbare Dateien (27)
-
stlCanDispenser_250ml_cover.stl
3 Ko · 9 775 Downloads
-
stl
CanDispenser_250ml_base.stl
52 Ko · 9 889 Downloads
-
stl
CanDispenser_250ml_stackable.stl
69 Ko · 9 771 Downloads
-
stl
CanDispenser_shortversion_250_cover.stl
3 Ko · 9 544 Downloads
-
stl
CanDispenser_shortversion_250_base.stl
52 Ko · 9 559 Downloads
-
stl
CanDispenser_shortversion_250_stackable.stl
69 Ko · 9 502 Downloads
-
stlCanDispenser_330ml_cover.stl
3 Ko · 9 833 Downloads
-
stlCanDispenser_330ml_base.stl
52 Ko · 10 040 Downloads
-
stlCanDispenser_330ml_stackable.stl
69 Ko · 9 864 Downloads
-
stl
CanDispenser_shortversion_330_cover.stl
3 Ko · 9 592 Downloads
-
stl
CanDispenser_shortversion_330_base.stl
52 Ko · 9 656 Downloads
-
stl
CanDispenser_shortversion_330_stackable.stl
69 Ko · 9 571 Downloads
-
stl
CanDispenser_355_base.stl
54 Ko · 9 968 Downloads
-
stl
CanDispenser_355_stackable.stl
70 Ko · 9 800 Downloads
-
stl
CanDispenser_355_cover.stl
3 Ko · 9 733 Downloads
-
stl
CanDispenser_shortversion_355_cover.stl
3 Ko · 9 590 Downloads
-
stl
CanDispenser_shortversion_355_stackable.stl
71 Ko · 9 596 Downloads
-
stl
CanDispenser_shortversion_355_base.stl
54 Ko · 9 603 Downloads
-
stl
CanDispenser_250rb_cover.stl
3 Ko · 9 276 Downloads
-
stl
CanDispenser_250rb_stackable.stl
69 Ko · 9 278 Downloads
-
stl
CanDispenser_250rb_base.stl
52 Ko · 9 311 Downloads
-
stl
CanDispenser_250rb_short_cover.stl
3 Ko · 9 238 Downloads
-
stlCanDispenser_250rb_short_stackable.stl
69 Ko · 9 150 Downloads
-
stlCanDispenser_250rb_short_base.stl
52 Ko · 9 147 Downloads
-
stlCanDispenser_75x100_cover.stl
3 Ko · 2 778 Downloads
-
stlCanDispenser_75x100_stackable.stl
73 Ko · 2 801 Downloads
-
stlCanDispenser_75x100_base.stl
54 Ko · 2 810 Downloads
Beschreibung
New version V2 available
https://www.thingiverse.com/thing:5957339
Stackable can dispenser
I've uploaded different dispensers:
- Ø58x115mm (250ml)
- Ø58x146mm (330ml)
- Ø67x124mm (355ml)
- Ø54x134mm (250ml redbull)
There is a "short version" of each dispenser so you can print it on a 200x200 bed
Edit 2017/03/18:
I've uploaded a "short version" of the dispenser. This should fit onto a 200x200 bed
Edit 2017/04/07:
Added .stl-files for the 355ml cans. I've also uploaded a screenshot so you can see how many 355ml cans fit into the dispenser.
Edit 2017/08/22:
Added .stl-files for the 250ml redbull cans as requested in the comments. Files are named 250rb / 250rb_short
I've only printed the 250ml version but the others should work as well. (Let me know if anybody tested it)
I used the following can model in the above renderings:
https://grabcad.com/library/coke-can-2012