9 Draw stacker
von Chris42H
Druckbare Dateien (5)
-
stlCross_Divider.stl
12 Ko · 2 302 Downloads
-
stlLong_Divider.stl
6 Ko · 2 305 Downloads
-
stlShort_Divider.stl
7 Ko · 2 292 Downloads
-
stlStorage_Stacker.stl
73 Ko · 2 504 Downloads
-
stlStorage_Stacker_Tray.stl
496 Ko · 2 438 Downloads
Beschreibung
Small components 9 draw storage stacker. The draws can be sub divided length ways or width ways. This was designed to store small electrical components.
The stacker is 83mm tall, 157mm wide, 79mm deep.
The trays have internal dimensions of 23mm tall, 46.5mm wide, 72mm deep.
The trays can be sub divided into a number of ways, either for equal compartments by fitting a cross piece, 2 - 4 compartments by fitting 1 - 3 short dividers or 2 compartments by fitting a long divider.