First Layer Test
von mikeneron
Druckbare Dateien (6)
-
stlFirst_Layer_Octo_0.2.stl
3 Ko · 33 166 Downloads
-
stlFirst_Layer_Extreme_Test.stl
100 Ko · 34 997 Downloads
-
stlFirst_Layer_Oval_0.2.stl
77 Ko · 30 668 Downloads
-
stlFirst_Layer_Circle_0.2.stl
56 Ko · 31 289 Downloads
-
stlFirst_Layer_Square_0.2.stl
1 Ko · 36 067 Downloads
-
stlFirst_Layer_Hex_0.2.stl
2 Ko · 31 287 Downloads
Beschreibung
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a perfect first layer as that is the most important layer.
Once you get a good result with the simple shapes, try the extreme test. If you can get that to print without any gaps, then you have a perfect first layer.