Sabrent SSD case
von Xarib
Druckbare Dateien (2)
-
stlsabrent_ssd_case.stl
87 Ko · 3 458 Downloads
-
stlsabrent_ssd_lid.stl
16 Ko · 3 405 Downloads
Beschreibung
This is a case for the Sabrent SSD to USB adapter. There are 3 versions and all of them should fit. I tested it with the type-c version. Every normal SSD should work. (max. height 7.7mm / 0.3031496 inch)
If the lid doesn’t fit, you just need to cut off a little bit the corners of the Case.
If the SSD is too lose take a piece of paper and fold it once or twice and put it in the case.