sequential shifter
von timetodime
Druckbare Dateien (7)
-
stlswitch_plate.stl
200 Ko · 5 173 Downloads
-
stlside_cover.stl
227 Ko · 5 161 Downloads
-
stlmounting_plate.stl
125 Ko · 5 159 Downloads
-
stlhinge_plate.stl
121 Ko · 5 152 Downloads
-
stlhinge.stl
100 Ko · 5 151 Downloads
-
stlbearing_rail.stl
177 Ko · 5 153 Downloads
-
stlbearing_holder.stl
202 Ko · 5 131 Downloads
Beschreibung
SIZE ALL STL FILES TO 1000% IN YOUR SLICER
parts still required :
- 2x 8mm rods , length doesn't matter
- 2x 8x7x22 ball bearings , any bearing with a 8mm inner diameter will do
- 6x 4mm bolts with a lengt of >4cm
- 2x 8mm bolts , lengt around 15mm
- a spring , strength and length don't matter
- a shift a knob
- 2x microswitches with a width of 2 cm or less
--> link to microswitches that i used : https://www.banggood.com/10pcs-5A-250V-3-Pin-Tact-Switch-Sensitive-Microswitch-Micro-Switches-Handle-KW11-3Z-Limit-Switch-p-1262681.html?rmmds=myorder&cur_warehouse=CN
for assembly of the siwtch holder you need to glue it to the rail as shown in the picture