XYZO Calibration Cube 20mm
von Jonnyo85
Druckbare Dateien (8)
-
stlXYZO_Cube_20mm_0.8_0.2.stl
78 Ko · 3 272 Downloads
-
stlXYZ-O_Cube_20mm_0.8_0.2H.stl
79 Ko · 3 143 Downloads
-
stlXYZO_Cube_20mm_1.0_0.2.stl
78 Ko · 3 131 Downloads
-
stlXYZ-O_Cube_20mm_1.0_0.2H.stl
79 Ko · 3 124 Downloads
-
stlXYZO_Cube_20mm_2.0_0.2.stl
78 Ko · 3 142 Downloads
-
stlXYZ-O_Cube_20mm_2.0_0.2H.stl
85 Ko · 3 130 Downloads
-
stlXYZO_Cube_20mm_2.0_1.0.stl
78 Ko · 3 140 Downloads
-
stlXYZ-O_Cube_20mm_2.0_1.0H.stl
85 Ko · 3 143 Downloads
Beschreibung
XYZO Calibration Cube 20mm
Dont forget to leave a Like or Comment or even Donate!
Please make sure that the Letters are on the correct axis when printing
I was having issues with Z-height The "Standard" XYZ Cube Wasn't cutting it.
By adding the O's to each axis I could see that something was not quite right straight away (as the O became ellipse (slightly))
When modelling this I decided to hollow our the centre as there is no need for it.
By adding a Chamfer to the top and bottom it can printed without the need of all that infill and there is no need for supports.
Files added so far
XYZO_Cube_20mm_0.8_0.2.stl
XYZ-O_Cube_20mm_0.8_0.2H.stl
XYZO_Cube_20mm_1.0_0.2.stl
XYZ-O_Cube_20mm_1.0_0.2H.stl
XYZO_Cube_20mm_2.0_0.2.stl
XYZ-O_Cube_20mm_2.0_0.2H.stl
XYZO_Cube_20mm_2.0_1.0.stl
XYZ-O_Cube_20mm_2.0_1.0H.stl
XYZO - Is that standard
XYZ-O - has holes
Frst numbers in the file is the size of the cube,
Second is the gap between the outer walls and the inner walls.
Third is the recess (extrusion) of the letters and circles (H = Hole).
All letters have a 3mm gap around them, all circles are 10mm⌀
If you want a variation in the model please let me know.