Abram's Toy Train

von JrPi

Druckbare Dateien (3)

  • stl

    Abrams_Train_Small_Wheel.stl

    88 Ko · 4 226 Downloads

    Herunterladen
  • stl

    Abrams_Train_Big_Wheel.stl

    78 Ko · 4 117 Downloads

    Herunterladen
  • stl

    Abrams_Train.stl

    352 Ko · 4 250 Downloads

    Herunterladen

Beschreibung

Here is a simple snap together train model. The train prints as a single piece with no support required (there are two support blocks for the rear wheels within the design that easily snap off after printing). Then the wheels (4 small and 2 big) can be printed. Finally the wheels snap onto the train. We found if the front 4 small wheels are a little tight then gently squeeze the mounting pegs (axels) with a pair of needle nose pliers to loosen them up. SketchUp model is included for tweaking the design (or putting your kid's name on the train).

Tags

#toy #train