Crates
von onebitpixel
Druckbare Dateien (4)
-
stlcrate_-_25_mm_x_30_mm.stl
1.7 Mo · 2 503 Downloads
-
stlcrate_shelf_-_34_mm_x_50mm.stl
429 Ko · 2 463 Downloads
-
stlcrate_-_34_mm_x_50mm.stl
1.7 Mo · 2 567 Downloads
-
stlcrate_-_34_mm_x_50mm__repaired_.stl
1.8 Mo · 2 334 Downloads
Beschreibung
using these for a 3D rebuild of Incursion can be used for any other miniature game
.
wooden crates; w/lids
.
larger crate contains an internal lip to insert the sideboard shelf if needed
.
smaller crate requires you to glue (I use acetone) the two blocks to the underside of the crate; lining them up with the two connecting boards along the one side; creates a lift for the crate w/o the need to print with supports
.
I've updated the 34x55 file; I did not get any errors from this file while printing with the Rep2x or the Afninia printer but I did notice after importing it into Netfab some issues showed up during the analysis which my 3D printing software seemed to either ignore and/or fix.