Encoder Knob
von V0lD
Druckbare Dateien (12)
-
stlRotary_Encoder_Knob_v3.stl
771 Ko · 2 717 Downloads
-
stl
30mm.stl
1.5 Mo · 2 160 Downloads
-
stl
25mm.stl
1.7 Mo · 2 206 Downloads
-
stl
16mm.stl
2.1 Mo · 2 726 Downloads
-
stl30mm_3mm.stl
1.5 Mo · 2 076 Downloads
-
stl25mm_3mm.stl
1.6 Mo · 2 038 Downloads
-
stl20mm.stl
1.6 Mo · 1 511 Downloads
-
stl16mm_3mm.stl
2.1 Mo · 2 599 Downloads
-
stl30mm_3mm_D.stl
1.5 Mo · 1 829 Downloads
-
stl25mm_3mm_D.stl
1.6 Mo · 1 831 Downloads
-
stl20mm_D.stl
1.6 Mo · 1 536 Downloads
-
stl16mm_3mm_D.stl
2.1 Mo · 2 502 Downloads
Beschreibung
Description
EC11 Rotary Encoder knurled knob
6mm inner diameter
Updates
08.09.2022
Added 20mm version.
22.03.2021
Added variations for D shaft encoders.
18.03.2020
Added a new revised design in 3 diameters: 16mm, 25mm and 30mm. All of them are 16mm tall.
Sidenote
The knob pictured above was printed at a 0.28 layer height, bottom part on the bed, and it had the top part sanded down.
If surface finish doesnt matter much to you, I would suggest printing it with it's top facing the bed, this way you wouldnt need any supports.