Toggle Switch Case
von MadestCat
Druckbare Dateien (3)
-
stlRocker_Switch_Case_-_upper_part.stl
289 Ko · 3 306 Downloads
-
stlRocker_Switch_Case_Single_-_upper_part.stl
274 Ko · 2 872 Downloads
-
stlRocker_Switch_Case_-_lower_part.stl
389 Ko · 3 297 Downloads
Beschreibung
This is a case for one or two toggle switches.
The outer shape is based on a generic emergency button.
Upper and lower part are connected with M3 screws, the lower part has brass hot melt inset nuts.
Edit 1 (2021/02/25): The holes are for common switches with a diameter of about 12 mm. If your switch doesn't fit, download the Fusion 360 file and change the diameter. It is really easy. The switches I used are these: https://www.amazon.de/gp/product/B01FHLPOK2
Edit 2 (2021/02/25): And here are the insets I use: https://www.amazon.de/gp/product/B08PV3R86P or https://www.amazon.de/gp/product/B08BCRZZS3.